Motor
- Technology: Z-Wave Plus
- Z-Wave Chip: 500 Series
- Power Supply: Lithium Cell 3.7V, USB DC 5V, 2A Max
- Operating Temperature: 32F to 122F (0C to 50C)
- Dimensions: 4.25 x 2.25 x 1.5 Inches (120 x 55 x 38)mm
- Frequency: US – 908 MHz
- Indoor/Outdoor Use: Indoor use only.
Battery
Dimensions:
Approximately 4″ x 1″ x .75″
Specifications
USB – 5V DC 2A, Max
Lithium Cell Battery – 3.7V DC, 2A Max
Special considerations have been made to provide battery safety
The battery is charged at 500mA as a safety precaution. This slow rate is the reason it can take at least 8 hours to completely charge the battery
Operating Temperature
32F – 122F
0C – 50C
Solar Panel
Dimensions:
12″ x 1.5″
Specifications:
5.5V, 230mA, 1.26W
Compatibility
iblinds is a Z-Wave plus certified device and will work with most Z-Wave enabled smart home controllers. All Z-Wave products should work together with each other regardless of brand, including backward-compatibility between versions.
Note: The iblinds device may default to a generic Z-Wave Switch, allowing the window blinds to exclusively open and close
Wink
Note: At this current time iblinds does not support Wink’s implementation of Generic Z-Wave Shade and Wink does not allow iblinds to default to a generic Z-Wave Switch.
Voice Assistants (e.g. Amazon Alexa, Google Home)
Smart assistants are NOT Z-Wave hubs so they won’t work directly with any Z-Wave devices. But you can use a compatible Z-Wave hub with smart speaker integration to control your blinds with voice control. These include the Homeseer, Hubitat, SmartThings, Vera, Home Assistant, and others.
Z-Wave Command Classes
iblinds Supported Command Classes – cc:5E,85,59,86,72,5A,73,26,25,80,70
Command Class Association Group Info V2
Command Class Association V2
Command Class Basic V2
Command Class Battery
Command Class Device Reset Locally
Command Class Manufacturer Specific V2
Command Class Powerlevel
Command Class Switch Binary
Command Class Switch Multilevel V4
Command Class Version V2
Command Class Z-Wave+ Info V2
iblinds V2 Product Details
Z-Wave Specific Device Type: Window Covering – Endpoint and Position Aware, CLASS_B_MOTOR_CONTROL Z-Wave Generic Device Type: Multilevel Switch
Z-Wave Role Type: Listening Sleeping Slave
Manufacturer ID: 0287
Product Type ID: 0x0003
Product ID: 0x000D